MiniMania.com
NEED HELP?

Currency: 
 Product Search







News Highlights
MagDog Removes Engine Debris

Studies by industry experts, educational institutions, professional associations, and others have consistently determined that very small ferrous debris (often less than 5 microns in size) traveling through a vehicle's lubrication system may cause considerable damage to engine wear-sensitive surfaces.
Read more...

Improving Your Mini Cooper Gas Mileage

by Don Racine
Most engines (and all Minis) use an electric spark to start the burning of the fuel/air mixture which in turn powers the car. If the engine is to run properly this 'electric spark' must happen at the exact right time.
Read more...

SprintBooster - Improve Throttle Response in your "Other" Vehicle.

SprintBooster changes the throttle response in the low to mid rpm range where cars spend a majority of their time. As a result, your car feels peppier and more powerful.
Read more...

Mini Cooper Verto Clutch Information

This article has been written owing to the increasing amount of people who ring Mini Spares stating that their 1275cc Injection type Mini will not start after fitting a new clutch, especially when they have purchased the parts from another supplier, usually a motor factoring company, rather than a Mini specialist.. There are 2 types of Pressure plates, namely AP (Automotive Products) and Valeo.
Read more...

 Newsletter Sign Up

Resources

New Mini Cooper Parts and AccessoriesMini Cooper Catalog
Found: 1 Items
My Wish List My Wish List  View Shopping Cart View Cart
BALL PRESSURE RELIEF
 
The oil pressure relief valve consists of an aluminum plunger with a heavy spring behind it. Access is through the 15/16" domed cap nut beside the dizzy. Once this nut is removed the spring will be visible. The plunger is beneath the spring and will probably be stuck, requiring encouragement to come out. Briefly cranking the engine over will usually free the plunger; in severe cases a thread tap can be screwed in to grip the plunger from the inside to draw it out. Now throw away the aluminum plunger and replace it with a steel ball (BLS916). The harder ball will never become galled or pitted and therefore won't get stuck. This spring (AEA536) and ball assembly should give you a steady 75 PSI @ high RPM. To prevent oil leaks, it is always a good idea to replace the copper washer (6K431) under the domed nut.
$2.25
 
 

 
Part No:  

Car(s):
MINI,MORRIS,SPRI



View In Catalog


   Also Purchased   May we Suggest   Shipping Info   Warranty   Price Guarantee   Customer Reviews  [0] 
 
Maximize Specials
Mini Cooper Part-TK100 PHANTOM GRIP LSD TUNING KIT (SPRING UPGRADE) 02-06 Full race upgrade- If your use of this LSD will be limited to a race track then you should have this simple to use upgrade kit. The internal springs are designed to work with increased horsepower and [ More Info]

On CLEARANCE: $25.00
List Price: $44.95
 
 
Mini Cooper Part-12G729MM OIL PUMP ADAPTER SPIDER DRIVE CAM TO SLOT DRIVE OIL PUMP This Oil Pump adapter is needed if your favorite camsahft has the early design 'star drive' for the pump. This cam was very common in the early Mini Cooper and most of the MG Midgets and Austin Healy [ More Info]

On SALE: $21.95
List Price: $29.95
 
 
Mini Cooper Part-C-AJJ4029A 8.4 VENTED 4 POT CAST CALIPER KIT MINI & MINI COOPER Metro Turbo Vented Brake conversion kit.
Kit comes with all parts required to convert a Drum Brake Mini to Vented discs, using the correct Mini hub uprights. Requires 12" or 13" wheels to fit.
More Info]

On SALE: $1,395.00
List Price: $1,595.00
 
 
Mini Cooper Part-MOTR1050 WEBER SWAN NECK INTAKE MANIFOLD

On CLEARANCE: $199.95
List Price: $300.00
 
 
 
copyright © 2008 MiniMania.com